PerTronix 91481 Ignitor II Adaptive Dwell Control for Holley 8 Cylinder

You looking to find the "PerTronix 91481 Ignitor II Adaptive Dwell Control for Holley 8 Cylinder" Good news! You can purchase PerTronix 91481 Ignitor II Adaptive Dwell Control for Holley 8 Cylinder with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $112.95    

Product Feature

• Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance
• Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage
• Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range
• Synchronized peak current and spark timing reduces heat build-up
• Senses startup and develops more energy for quicker, easier starting

Product Description

The Ignitor II has many of the same great features that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire RPM range. Ignitor II systems develop up to 4 times more energy between 3000 and 5000 RPM than standard ignition systems. High RPM performance is improved when used with the Flame-Thrower II super low resistance 0.6 ohms and 45,000 volt coils.

PerTronix 91481 Ignitor II Adaptive Dwell Control for Holley 8 Cylinder Review

There is not much I can say about this thing. It fit and conversion could not have been easier. The company also has some good resources available on their website for instillation and troubleshooting. To me this is a much better option for a direct points replacement than an MSD ignition as it doesn't require any special hardware or additional boxes.

Most of the consumer Reviews tell that the "PerTronix 91481 Ignitor II Adaptive Dwell Control for Holley 8 Cylinder" are high quality item. You can read each testimony from consumers to find out cons and pros from PerTronix 91481 Ignitor II Adaptive Dwell Control for Holley 8 Cylinder ...

Evan-Fischer EVA17572021730 Bumper Reinforcement Front Cross Member Steel Primered

You looking to find the "Evan-Fischer EVA17572021730 Bumper Reinforcement Front Cross Member Steel Primered" Good news! You can purchase Evan-Fischer EVA17572021730 Bumper Reinforcement Front Cross Member Steel Primered with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $118.39    

Product Feature

• A high quality, OE replacement Bumper Reinforcement from Evan-Fischer.
• Evan-Fischer products are covered by 1-Year Unlimited Mileage Warranty.
• This item is brand NEW; Evan-Fischer do not offer remanufactured or refurbished products.

Product Description

Evan-Fischer Bumper Reinforcement is an affordable replacement product for your restoration needs; provide additional protection for your ride with this OE comparable bumper reinforcement. Manufactured in accordance to industry standards to ensure product durability and reliability; best of all, Evan-Fischer products are covered by 1-Year Unlimited Mileage Warranty.

Evan-Fischer EVA17572021730 Bumper Reinforcement Front Cross Member Steel Primered Review

you made my son very happy young man, now we can finish his truck as far as front end of truck.

Most of the consumer Reviews tell that the "Evan-Fischer EVA17572021730 Bumper Reinforcement Front Cross Member Steel Primered" are high quality item. You can read each testimony from consumers to find out cons and pros from Evan-Fischer EVA17572021730 Bumper Reinforcement Front Cross Member Steel Primered ...

Evan-Fischer EVA17872030084 Bumper Cover Front Facial Plastic Primered With provisions for emblem and grille holes air fog light

You looking to find the "Evan-Fischer EVA17872030084 Bumper Cover Front Facial Plastic Primered With provisions for emblem and grille holes air fog light" Good news! You can purchase Evan-Fischer EVA17872030084 Bumper Cover Front Facial Plastic Primered With provisions for emblem and grille holes air fog light with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $114.29    

Product Feature

• A high quality, OE replacement Bumper Cover from Evan-Fischer.
• Evan-Fischer products are covered by 1-Year Unlimited Mileage Warranty.
• This item is brand NEW; Evan-Fischer do not offer remanufactured or refurbished products.

Product Description

Product Description:

• Notes: With provisions for emblem and grille; With holes for air and fog light

Evan-Fischer Bumper Cover is an affordable replacement product for your restoration needs; this is an OE comparable item, manufactured in accordance to industry standards to ensure product durability and reliability. A high-quality bumper cover will not only reinforce the protective function of the bumper, but it will also enhance the appeal of the vehicle. All Evan-Fischer products are covered by 1-Year Unlimited Mileage Warranty.</p>

Evan-Fischer EVA17872030084 Bumper Cover Front Facial Plastic Primered With provisions for emblem and grille holes air fog light Review

Fits perfectly and looks great! No issues with installation and looks like it came strait from Nissan itself! Very sharp and appears very sound!

Most of the consumer Reviews tell that the "Evan-Fischer EVA17872030084 Bumper Cover Front Facial Plastic Primered With provisions for emblem and grille holes air fog light" are high quality item. You can read each testimony from consumers to find out cons and pros from Evan-Fischer EVA17872030084 Bumper Cover Front Facial Plastic Primered With provisions for emblem and grille holes air fog light ...

01-05 KAWASAKI ZRX1200R: Dynojet Stage 1 & 3 Jet Kit

You looking to find the "01-05 KAWASAKI ZRX1200R: Dynojet Stage 1 & 3 Jet Kit" Good news! You can purchase 01-05 KAWASAKI ZRX1200R: Dynojet Stage 1 & 3 Jet Kit with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $112.99    

Product Feature

• Stage 1Intended for motorcycles with a stock engine using the stock airbox, air filter and stock pipe.
• Stage 1 kits are fully adjustable to allow the use of a well designed aftermarket pipes and stock replacement air filters like K&N.
• Stage 1 kits are designed to improve throttle response and driveability and in most cases power increases of approximately 5% throughout the entire power range can be achieved.
• Stage 3Intended for motorcycles with stock or mildly tuned engines using a well designed aftermarket pipe and individual air filters.
• In most cases power increases of 10-15% can be achieved.

Product Description

However driveability may be compromised particularly with short stroke, high rpm motors. On some modern engine and airbox designs, individual filters and proper jetting offer no performance improvement yet compromise driveability, in such cases stage 3 kits are not available. Maximizes carburetor performance. Includes step-by-step instructions. Includes jets for both stage 1 and 3.
Fits:
KAWASAKI
ZRX1200R 01-05

01-05 KAWASAKI ZRX1200R: Dynojet Stage 1 & 3 Jet Kit Review

We got it much earlier than we expected. Every thing was there and now looking forward to some spare time to put it to use.

Most of the consumer Reviews tell that the "01-05 KAWASAKI ZRX1200R: Dynojet Stage 1 & 3 Jet Kit" are high quality item. You can read each testimony from consumers to find out cons and pros from 01-05 KAWASAKI ZRX1200R: Dynojet Stage 1 & 3 Jet Kit ...

2007-2012 AVENGER SEBRING CALIBER FRONT WHEEL BEARING & HUB ASS. MOPAR OEM ABS

You looking to find the "2007-2012 AVENGER SEBRING CALIBER FRONT WHEEL BEARING & HUB ASS. MOPAR OEM ABS" Good news! You can purchase 2007-2012 AVENGER SEBRING CALIBER FRONT WHEEL BEARING & HUB ASS. MOPAR OEM ABS with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $113.00 $111.82   

Product Feature

• OEM FITMENT
• 12 MONTH WARRANTY AT ANY DODGE DEALERSHIP IN THE NATION!!!

Product Description

NEW IN PACKAGE GENUINE OEM MOPAR FRONT WHEEL BEARING 7 HUB ASSEMBLY-EACH PART # 5154211AA FITS 2007 TO 2012 DODGE AVENGER EQUIPPED WITH ABS BRAKES FITS 2008 TO 2012 CHRYSLER SEBRING EQUIPPED WITH ABS BRAKES FITS 2008 TO 2009 DODGE CALIBER EQUIPPED WITH ABS BRAKES NEW REPLACEMENT GENUINE OEM FRONT WHEEL BEARING & HUB ASSEMBLY, WHY SETTLE ALWASY BUY MOPAR!!!!! OEM QUALITY AND FIT!!!!! 12 MONTHS WARRANTY AT ANY CHRYSLER, DODGE & JEEP DEALER ACROSS THE U.S.!!!! IF YOUR UNSURE OF YOUR APPLICATION PLEASE SEND US YOUR VIN NUMBER FOR APPLICATION VERIFICATION!!!!

2007-2012 AVENGER SEBRING CALIBER FRONT WHEEL BEARING & HUB ASS. MOPAR OEM ABS Review

Good I wonder if this piece is the right or left because, I have left urgent need right!!I'm from Venezuela and I can not call me your email to write you and know if you have one in right?

Most of the consumer Reviews tell that the "2007-2012 AVENGER SEBRING CALIBER FRONT WHEEL BEARING & HUB ASS. MOPAR OEM ABS" are high quality item. You can read each testimony from consumers to find out cons and pros from 2007-2012 AVENGER SEBRING CALIBER FRONT WHEEL BEARING & HUB ASS. MOPAR OEM ABS ...

KemPhlats Hot Rod Black Urethane Paint Kit

You looking to find the "KemPhlats Hot Rod Black Urethane Paint Kit" Good news! You can purchase KemPhlats Hot Rod Black Urethane Paint Kit with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $119.99    

Product Feature

• Kit containing one full gallon of KemPhlats Hot Rod Black Low Gloss Urethane Topcoat and all needed reducers and activators
• Fast Covering low gloss topcoat. No clear required
• High quality finish designed to resist fading, flaking, cracking and other aging defects
• Incredible savings over competitive products of comparable quality
• Create that cool low sheen look at an affordable investment!

Product Description

With this kit You get a gallon and a half (1.5 gallons) total of sprayable high coverage low gloss black material for an incredible value. This product will give you that cool satin low gloss sheen that lasts for a price anyone can afford. Unlike some companies that re-package black primer as Hot Rod Black, this black is made with durable urethane co-reactants and automotive grade black pigment, multiple flatteners, flexing polymers, and additives to make a durable, flexiblie flat finish resistant to fading, cracking, checking, and general deterioration from the elements. This product makes a beautiful sleek satin finish perfect for overalls to get that rat rod look that is hot or graphics like racing stripes. Tech sheets outlining mixing and use will be offered with each order.

KemPhlats Hot Rod Black Urethane Paint Kit Review

Used it to refinish complete 49 Ford Hot Rod. Smooth finish, you can go all the way around the car with no dry spots.I still have enough left to do another complete car. Got a lot of compliments on car and paint. I've seen guys use everything from rattle cans to John Deer straight enamel semi-gloss.This being a two part polyurethane is faster drying(less dust) and more durable than either.

Most of the consumer Reviews tell that the "KemPhlats Hot Rod Black Urethane Paint Kit" are high quality item. You can read each testimony from consumers to find out cons and pros from KemPhlats Hot Rod Black Urethane Paint Kit ...

Denso 950-0185 Fuel Pump

You looking to find the "Denso 950-0185 Fuel Pump" Good news! You can purchase Denso 950-0185 Fuel Pump with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $121.25 $117.99   

Product Feature

• Denso # 950-0185

Product Description

The Premier Fuel Pump Supplier: DENSO is the world's premier OE fuel pump supplier. DENSO uses expertise to produce their First Time Fit line of pumps. Because DENSO's rigorous manufacturing and testing process produces each fuel pump, you can be sure it meets our high standards for fit and performance. You've Got Options: The DENSO First Time Fit line of fuel pumps is available in kit form or as individual pumps and filters. You can purchase pumps and filters alone or purchase a fuel pump kit which includes an installation kit and a fuel pump filter - just another example of how, with DENSO, you get what you need to do the job right the first time.

Denso 950-0185 Fuel Pump Review

Essential the same fuel pump that comes with car being Denso. The fuel hose and clamps that come with the kit seem flimsy but get the job done. Electrical terminals are exactly like original. No issues with installation.

Most of the consumer Reviews tell that the "Denso 950-0185 Fuel Pump" are high quality item. You can read each testimony from consumers to find out cons and pros from Denso 950-0185 Fuel Pump ...